The purpose of this study was to automatically track an Unmanned Aerial Vehicle (UAV), with an electronically steered antenna. To make it possible to track the UAV during flights, a 2.4 GHz transmitter was mounted on the aircraft. Due to …...―
The air suspension system is an air-operated, microprocessor controlled suspension system. Air ride suspension carries the load on each axle with a pressurized air bag much like a high pressure balloon. This system replaces the conventional coil...―
Introduction A microcontroller is a small, low-cost and self contained computer-on-a-chip that can be used as an embedded system. A few microcontrollers may utilize four-bit expressions and work at clock rate frequencies, which usually include: An ...―
Baud Rate is the data transmission rate that determines the symbols per second for serial communication. The microcontroller is connected with COM port of the PC for the purpose of serial communication. So, in order to allow data transfer between ...―
While there have certainly been attempts at easing the Arduino learning curve, many of these still demand a new board or simplify just one aspect of a much larger universe. Olympia Circuits' new Arno Shield could help strike a better balance...―
Keil Microvision is an Integrated Development Enviornment (IDE) tool developed for students, embedded system designers and developers to make their programming easier. The keil combines project management, source code editing, program debugging ...―
Flash Magic is a PC burner tool for programming flash memory based microcontroller using serial or Ethernet protocol built by NXP. This tool helps the developer to easily burn the hex file generated by the embedded software like Keil µvision...―
Robometricschool. - In microcontroller project edition, we want to share with you how to make design Microprocessor that very important in microcontroller part. As we know that Microprocessor consist of three main parts likes Arithmetic Logic Unit...―
Software development tools include include text editors, cross assemblers, cross compilers, simulators, source level debuggers, and integrated development environment (IDE) used to develop the program that can be burnt into microcontroller to ...―
Programming the microcontroller is one of the basic step while designing an embedded system. Here in this tutorial, i am presenting you on How to burn a program into the microcontroller as step by step. For that i am using Keil microvision ...―
Depending on the age and personality of your kids, they’ll either be really ...
Who would have thought a meal can be made out of a simple baked potato then topped with a ...
For the most part, I enjoy clean, healthy eating. I try to stay away from frozen foods and ...